Thursday, September 30, 2010

Very First Challenge Card

Mary at Cardz TV ( http://www.cardztv.blogspot.com/ ) made a challenge to make a card without using any Cricut cartridges. I thought this sounded like fun. So, this is my first challenge. Wish me luck...lol.

Finished card: 5 1/2" x 4 1/4"

Materials:
Sizzix Flower, Sunflower
Fiskers Rope Border
Inkadinkado Happy Everything Stamp Set
Cardstock: Brown, Yellow, Green and Patterned Paper
American Crafts Elements Large Brads Black
Birdseed
Ribbon

Directions:
1. Take one (1) black brad and dip in glue. Dip into birdseed and make sure top is completely covered. Let dry. When dry, brush a thin coat of glue over top to seal birdseed in.
2.Cut 8 1/2" x 11" from brown cardstock. I used AC Cardstock. Fold in half to make an A2 card (4 1/4" x 5 1/2").
3. Punch the long edge of the base with the rope border punch.
4. Cut four (4) flowers in yellow cardstock and three (3) in green using the Sizzix Die. Cut the stems off all four (4) yellow flowers. Cut the flowers off of two (2) of the green ones. One for the green flowers/stem will be used as the base. Ink the edges of the flowers in tan and the stems in green. Crinkle the edges of the flowers and leaves on the stems. Layer the flowers onto the green stem and use the birdseed brad to keep together. Make sure that the petals do not line-up. Glue the green stems together on the base, squeezing up the end of the top stem to make it stick up a little.
5. Cut the patterned paper 5 1/2" x 4 1/4" to fit the inside of the card. Glue down. Cut another piece of patterned paper 5" x 3 1/4" and use the border punch again on a long edge.
6. Cut the green cardstock 3 3/8" x 5 1/4".
7. Glue the patterned paper on the green. Glue a piece of ribbon around the cardstock. Cut another piece of ribbon and tie a knot. Angle the ends. Glue down the green cardstock to the brown base.
8. Stamp the sentiment on front in brown ink.


9. Cut a small piece of scrap brown cardstock, punch it with the border punch and glue down.


Hope you like this card as much as I had fun making it. Now if I can do this, imagine what you could do...

Monday, September 27, 2010

Champagne for two...

Our family attended a beautiful wedding this past weekend. Our niece was married at Lake George. She looked like a princess. One of the guests (she was about 3 maybe 4 years old), wanted to have her picture taken "with the pretty lady".

I had made this card a while ago but had never put any sentiment in it. I thought that it would be perfect to give to the bride and groom.


Finished size: 4 1/4" x 5 1/2"

Materials:
Cricut Cartridge Tie the Knot  Toast Base (page 44), Shift Base
Martha Stewart Deep Edger Punch-Garden Trellis
Gold Glitter
Cardstock: Patterned paper, White
Ribbon

Directions:
1. Fold 8 1/2" x 5 1/2" card in half to make an A2 card (4 1/4" x 5 1/2"). Using the Garden Trellis punch, punch the long edge of the front of the card.
2. Cut the pattered paper to fit the inside of the card (4 1/4" x 5 1/2"). Glue down. Cut another piece for the front leaving 1/4" border (I'm not sure of the exact measurements).
3. Cut the ribbon so it fits around the patterned paper long-wise, then adhere to the back of the front panel. Glue the panel down.
4. Using Tie the Knot cartridge, cut the toast (glasses) base in white cardstock. (again, not sure of the exact measurement...) Cut the Shift base also in white cardstock. Cut off the stem of the glasses, glitter the top of the glasses and the bubbles with gold. Layer and 3D-Dot to the front of the card.
5. Stamp the sentiment to the inside of the card. I used "Best Wishes".

I hope that the bride and groom liked my card, as I gave it with love. I hope all their dreams come true... now go and make your creative dreams come true...imagine what you could do....

Thursday, September 23, 2010

3D Coffins

I've been dying (ooo, bad pun...lol) to make the 3D projects on Happy Hauntings. Thought these were really neat.

The coffin with the ghost: cut at 6". Finished size...3 1/2" long x 2 1/4" across (from point to point). The coffin with the skull: cut at 4". Finished size...2 3/8" long  x 1 1/2" across.

Materials:
Cricut Cartridge Happy Hauntings 3D Coffin page 72  (Bottom) Shift Base, (Top) Shift Layer 1
Cricut Cartridge Pumpkin Carving  (Spider Web) Button 37
Cricut Cartridge Indie Art (Skull and Bones) Button 1, Base and Shadow Layer
Cricut Design Studio
Cuttlebug Embossing Folder Spiderweb
Martha Stewart Embossing Powder Ebony
Martha Stewart Glitter Onyx
K and Company Dimensional Stickers HW Tombstone
Cardstock: Black, Orange
Ribbon

Directions for both coffins:
1. Cut one (1) bottom and one (1) top from Happy Hauntings.
2. Fold and glue tabs.


Embellishing Ghost coffin:
1. Use Design Studio and Pumpkin Carving Cartridge, stretch spiderweb so it will overhang on all sides of coffin. Cut in black cardstock.
2. Glue front of web and flock.
3. Glue web to top of coffin. Cut off excess around edges. Be careful not to cut coffin top.
4. Glue ribbon around edge of top coffin piece.
5. Stick on Ghost.

Embellishing Skull coffin:
1. Use Indie Art Cartridge and cut one (1) base skull in black cardstock and one (1) shadow in orange at 1".
2. Glitter base skull.
3. Take a small scrap piece of black cardstock (larger than the top of the coffin) and emboss with Spiderweb folder. Glue on top piece of coffin and cut off excess cardstock. Be careful not to cut the coffin.
4. Glue ribbon around edge.
5. 3D-Dot the Skull on top of coffin.


Candy (one of my favorite things...yum) fits very well inside. (Snack size for the ghost and actually a third Tootsie Roll Midgees fits, if you turn them just right).

The coffins are easy to make, (it's the embellishing that takes more time...lol) and would make great favors for a party. Hope you have as much fun making them as I did. I would love to see what you create...so enjoy and imagine what you could do...

Wednesday, September 22, 2010

Halloween Scene Card

Here's another card for Halloween. I had cut the base to use for another project but it didn't look right. So, since I didn't want the paper to go to waste, I made another card. (lol) Not quite sure what I will be doing with all these cards, but I sure am having fun making them.

Finished card is A2 (4 1/4" x 5 1/2")

Materials:
K & Company Specialty Papers
Cricut Design Studio
Cricut Cartridge Happy Hauntings 3D Tree (page 71) Base, Bat2 (page 53) Base
Cricut Cartridge George and Basic Shapes  Circle (moon) (page 108) Shift Base
Sizzix Sizzlits Fence, Picket
Recollections Dimensional Stickers (Jack-o-lanterns)
Inkadinkado Clear Stamps All Hallow's Eve
Martha Stewart Flocking Powder Black
Cardstock: Black, Yellow, White and Orange

Using Design Studio, I cut the tree (actually, I cut the wrong tree because this is the 3D one and has a slit near the top. I really wanted the tree on page 67. However,  I used the tree on page 71 and glued a small piece of black cardstock behind the slit and then glued and flocked the tree...can't see the slit!).
I cut the bat and the circle (moon) using Design Studio also. I'm sorry, I didn't write down the measurements.
Next, I cut the fence twice, using my Sizzix.
I glued everything down, then added the Jack-o-lantern dimensional sticker.

I cut the white cardstock at 3" x 4" and inked the edges with black pigment ink. I cut the orange cardstock at 2 3/4" x 3 3/4", inked the edges and stamped the Trick or Treat Sentiment. Glued the white cardstock at an angle, then the orange cardstock on top on angle also.

I like the way this tree turned out (even if it was originally the wrong one...lol) Mistakes happen! The next time you think you have a mistake, think again...it may have happened for a reason....just imagine what you could do.

Tuesday, September 21, 2010

Enter If You Dare...

Just a quick post today...no real directions. This is the second card I made yesterday. It is also the beginning of the card I started to make the other day that warped into something totally different (Flocked Witch Hat).

I used Cricut Cartridge Happy Hauntings (3D Frame page 68, Base, Enter If You Dare Phrase and Phrase Shift). I flocked the spider frame in black. Enter If You Dare is pop dotted with 3D-Dots.

It's a tri-fold card. (I cut the frame in half after I had glued it to the front of the tri-fold. Do NOT cut the center oval in half and only glue one side of the oval to the card).

The inside of the card is from K & Company Specialty Paper. The top border is Martha Stewart Drippy Goo Edger Punch in black cardstock and the Sentiment is from Inkadinkado All Hallow's Eve Clear Stamps in white pigment ink.

I'm having a blast making Halloween cards, although I'm not really sure what I am going to do with them..lol.
Have fun creating...imagine what you could do.....

Monday, September 20, 2010

Mini Monsters...Creepy

I made two different cards for today (but I will post the other one at another time). Both of these cards were giving me a hard time coming together. I had made the little monster a while ago and just thought she was a cutie.

Finished card is A2 (4 1/4" x 5 1/2")

Materials:
Cricut Cartridge Mini Monsters (Creepy pg 31, Base, Layer 1, Shift Layer 1, Layer 2, Base Shadow)

Cardstock for Monster:  Lt Pink (Layer 1), Med Pink (Base Shadow), Dark Pink (Base), White (Layer 2), Silver (Shift Layer 1)
Cardstock for card: Pattered for base, Med Pink, White, Gray
EK Success Corner Adorner Basket Weave
EK Success Corner Adorner Rounder Punch - Large
Cuttlebug Embossing Folder Swiss Dots
Cuttlebug Embossing Folder D'Vine Swirls
1/4" wide Light Pink Ribbon

Directions:
1. Patterned Cardstock (4 1/4" x 11") Score on patterned side at 5 1/2". Score on backside at 2 3/4". Fold (making a "Z" shape)
2. Cut Creepy (2 1/4") and layers. Emboss body base with D'Vine Swirls.  Put all layers together. Glitter wings. Glue on googly eyes (Two (2) different sizes)
3. Cut med pink cardstock 4 1/4" x 3 1/4". Punch two (2) opposite corners with Basket Weave.
4. Cut white cardstock 2 3/4" x 3 3/4". Emboss with D'Vine Swirls. Punch two (2) opposite corners with Corner Rounder (cut the opposite corners from the Basket Weave corners)
5. Cut gray cardstock 3 3/8" x 2 3/8". Emboss with Swiss Dots. Punch the same two (2) opposite corners as the white cardstock.
6. Layer the gray onto the white and glue. Tuck into the basket weave corners.
7. Cut med pink 4 1/4" x 3 1/4" and glue to the back of the Basket Weave assembly (this hides the white cardstock from showing through the basket weave). Place glue only on one half (left side as you are looking at the front) and center on the front of the patterned card.
8. Place 3D-Dots on back of Creepy and center on the gray cardstock.
9. Tie ribbon around front side of card. Make a knot then make a bow. Glue under the bow so it doesn't move.

For the inside:
1. Cut med pink cardstock 3 1/4"  x 3 1/2". Punch two (2) opposite corners with Basket Weave (the other two corners from the front).
2. Cut white cardstock 2 3/4" x 3". Stamp the sentiment and tuck into basket weave corners. Glue to inside, make sure that when the card is closed, the front covers it.

Hope that wasn't too hard to understand...it's easier than it sounds. Really! This is another one of those cards that the sentiment could change...Happy Birthday, Happy Valentine's Day, Thinking of You, etc.

On another note...had a great time with my youngest son last Friday. He's away at college, so I drove up to see him. We then went into New York City  and saw a play...(off Broadway) "The 39 Steps". It was so good. Four actors play like 150 parts. Very funny. If you get a chance to see it, I highly recommend it.

So, get creative and if you get stuck, put it away, and go back to it later...(took me weeks)...finally it will come together...imagine what you could do.......

Sunday, September 19, 2010

Flocked Witch Hat

Have you ever started out with one idea but have it warp into something completely different? That's what happened with this one. I had this idea in my head, but as I was putting it together, it just wasn't coming out the way I thought it should. So, I kept changing things and this card was the final result. I am really happy with it. Unfortunately, I never feel that my photos ever do justice to my cards. They look SO much better in person. Do you have this same problem? How did you solve it (if you did)? I would love to know.

To make the card I used:
Design Studio
Cricut Cartridge Happy Hauntings  (Witch Hat page 54, Base, Shift Base, Layer 1 and Shift Layer 1 )
EK Success Edger Punch Parisian
Cuttlebug Embossing Folder Spiderweb
Martha Stewart Glitter Onyx
Martha Stewart Flocking Powder Ebony
Cardstock: Lime Green, Black, Purple and Yellow/Gold and K & C Company Specialty Paper

1.Base Card is 4 1/4" x 5 1/2" (A2) Lime Green Cardstock. Cut 1/2" off the front edge and punch it with Parisian.
2. Cut a 2" x 5 1/2" piece of lime green cardstock and emboss it with Spiderweb. (Take care of your placement on the folder. I wanted the main part of the web on the left side) Center it on the front of the card and glue it down.
3. Cut two small strips from the patterned paper (approx 1/4" x 5 1/2") and glue them to either side of the spiderweb cardstock.
4. Cut the Witches Hat (in Design Studio stretching it a little) approximately at 3" in black. Spider in black, Band in purple and Buckle in yellow/gold. Make sure the layers all fit properly.
5. Run the hat through the Xyron...upside down. Peel off the hat, then adhere the purple band. Next, mask off the spider, then flock hat. (I hope you can tell in the photo). Unmask the spider and glitter it with the black glitter. Also glitter the buckle with some clear/multicolored glitter, then glue the buckle to the hat. Use 3D-Dots, place the hat on the front of the card, making sure that the spider looks like it was crawling off the center of the web.

For the inside of the card:
1.Glue the Base Shift spider in the corner.
2. Cut a piece of patterned paper (1 3/4" x 5 1/2"), punch the top edge with Parsian, then glue it down.

I still want to stamp "Trick or Treat" or "Happy Halloween" on the inside; however, I do not have either sentiment in a stamp form. (So, off to the store I will go today. Again, I have this specific vision...lol)

For the longest time, I saw the flocking powder in the store and thought " What would you ever use that for?" Then, that lightbulb went off in my head. So I purchased it and well, I love the way it looks.  I have a few more ideas using it, so expect to see it again in some upcoming projects.

I also changed how I post the directions. Do you like this format better? I would love to know. Please leave me a comment.

(Since I am pretty new to this blogging thing, I would love to know how you veterans were able to get more followers and/or comments. I would appreciate any feedback. Thanks.)

Now it's your turn to try something new. I did, now just imagine what you could do......
Related Posts with Thumbnails